Heating Problems of Furnace which need to check and repaired by the skilled-based technician

Is your Furnace been inspected regularly if not then it may cause you some problems because at least once a year your system must be check and have maintenance regularly? It helps you to be safe from the suffering of cold on winter nights.

It’s so important to maintain the seasonal cleaning and tune-ups of your furnace regularly. Most people don’t remember their furnace system maintenance normally because it kept in the basement o somewhere normally people can’t see it regularly and due to this it sometimes causes the shocking shut down of a furnace.

Though there can be many problems with your furnace but heating problems are the major ones that need to be check, repair, and maintain by a professional technician because if it goes in the wrong hand or untrained technician can affect your furnace badly. Which can be poor-performing or a sudden breakdown.

The most common problem with your furnace can be burner failure, dust, and debris in clogged filter, furnace causing too much high heat or rapid cycling problems, doesn’t blow air or blower running continuously, the flame sensor needs cleaning, having leakage in the gas pipeline or producing a gas smell. All these problems need to be checked and repair by professional technicians. Those who have great knowledge in the HVAC industry.

Let’s take a look at the Furnace electrical issues and how our skilled technician solved them are following

Following are the furnace heating problems and their techniques of how to solve them: –

Problem no.1 Burner failure

The most common heating problem with the furnace is burner failure which causes due to contamination. Our technician will clean the burner from all debris and dust. But the question is how to that the burner is contaminated or clean.

So, the answer is very clean and clear it can be guessed by its color appearance like if your burner is blue it’s mean that your burner is likely to clean. if it is yellow in color. It shows that your burner is dirty. our technician will clean the burner and the nearby area also especially the blower. Normally the dust comes during the summer season because we don’t use, the furnaces and don’t even bother to go and check the furnace. Therefore, it is very important to check and clean the furnace regularly once a year by a trained and skilled based technician. A combination of condensation and soot makes the burner work improperly and causes problems to the furnace as well. The burner assembly should be cleaned at least once a year or replaced if the existing burner is poor in condition.

Problem no.2 Rapid cycling problems: –

Rapid cycling is the problem which means that it turns on and off again or quickly. This is normally caused by the dirty or worn-out air filter which needs to be replaced and cleaned by the professional technician or still if it doesn’t give the heating then there must be a problem with the blower motor or with the motor’s belt which our technician will change it according to its requirement.

Problem no.3 Furnace does not blow air: –

To check the blower is clean and free from debris. Check the inspection window of the furnace. The more ways are to check the blow air problem is with the help of its color. If its light is red it needs to be got service as soon as possible or if the light is switched off then there must be the major problem like thermostat, blower motor, capacitor, furnace control board or transformer which need to be checked and repaired by the skilled technician of Cambridge heating and cooling.

Problem no.4 Continuously funning of furnace blower: –

The blower is situated between the ductwork and the furnace. Whose function is to sent the cool air into the heat exchanger and warmed air to the plenum and then in the whole house but if it is continuously running and doesn’t get shut off is a sign to check the blower fan or the faulty limit control switch which need to be check and replaced by the skilled technician because this is the most delicate work to for which you need the best-skilled technician.

 

Problem no.5 Flame sensor cleaning: –

The flame sensor is a crucial safety feature in your furnace. It safe your furnace from the unsafe burning of fuel and if it is dirty can cause you the improper functioning of your furnace.

Steps how our technician solve the flame sensor problem

Step1. Firstly, the furnace has to get switched off from the breaker box.

Step 2: Then remove the sensor from the furnace, then scrub the sensor to remove dust and debris. If the furnace is not cleaned regularly Then oxidation and carbon buildup restrict the flame sensor’s ability to work which spoils the furnace very badly.

Step 3: Then reattached and switched the furnace again if it works shows the sign that your furnace is good in condition but still if it doesn’t work then it has the problem of a micro amp draw reading which can only be provided you by the professional technician.

Step 4: After cleaning the flame sensor but still not working then the sensor needs to be cleaned with the steel wool and fixed it back again and if the dirt is the only reason you will see a huge change in the higher amp reading. If still the reading is not changed then it needs to repair the diagnostic process.

Problem no.6 Gas line inspection: –

Check the gas line to avoid leakage because the gas leakage will not affect the furnace performance4 it can also cause a big explosion in the house which is very dangerous for everyone. So, this needs to be checked and repair by the skilled-based technician with their special checking equipment.

Problem no.7 clogged filter issues: –

This the most common and difficult problem of the furnace which affects badly the furnace’s improper working. If your furnace is not working properly due to the reason of filter issues then it needs to clean the debris because when your air filter is clogged then your air handler has to work very hard to compensate for the blockage of the airflow which causes you high utility bill and also overheats your heat exchanger and gets shut off. To avoid this the clogged filter, need to get change by a trained and skilled based technician.

The latest models of the furnace are very sensitive and delicate their parts are also if it goes in the wrong hand or unprofessional technician can cause you big loss because it is the most expensive and necessary equipment of the house. The Cambridge heating and cooling wants to tell you that we have the best and trained, skilled, and licensed technicians in the whole GTA for more information you can contact us at 416-750-4363.